Launch Slideshow

6 LED Deck Lighting Systems

6 LED Deck Lighting Systems

  • http://www.ecobuildingpulse.com/Images/Dabmar_1_tcm131-807926.jpg

    true

    600

    Dabmar. The LV-LED321 is an in-ground drive-over well light made for decks, driveways, and walkways, says the firm. The cover is stainless steel and the in-ground portion is cast aluminum with a PVC sleeve. It can be specified with 14 types of LED lamps protected by a heat-resistant lens. The pre-wired fixtures are ETL approved for safety, according to the manufacturer. The company also offers a surface-mount model for steps, posts, and rails that holds a bulb with a 50,000-hour life. 805.604.9090. www.dabmar.com.

  • http://www.ecobuildingpulse.com/Images/Kichler_4_tcm131-807921.jpg

    true

    600

    Kichler. Linear fixtures with a low heat output, Design Pro LED deck, step, and bench accent light fixtures have a thin 2/3-inch profile and install with two screws in almost any surface, says the company. The fixtures use 75% less energy than incandescents and give off a warm white color. The fixtures come in aluminum, copper, and brass finishes and in three sizes: 6.9 inches, 12.9 inches, and 18.9 inches. 866.558.5706. www.kichler.com.

  • http://www.ecobuildingpulse.com/Images/StairLightingSystem_4_tcm131-807941.jpg

    true

    600

    StairLighting System. Using low-voltage DC power, DeckLighting Systems connect easily with a plug-and-play wiring harness. The system comes in three kits: Decklighting, Postlighting, and Outdoor Stairlighting packages, which include LED fixtures, wiring harnesses, and fasteners. The LED bulbs are 80% more energy efficient than incandescent bulbs and last for up to 100,000 hours, claims the firm, which backs the lights with a lifetime warranty. Fixtures are available in white, black, and antique bronze finishes. 888.305.4232. www.decklightingsystems.com.

  • http://www.ecobuildingpulse.com/Images/Timbertech_1_tcm131-807939.jpg

    true

    600

    TimberTech. The low-voltage DeckLites system brightens decks with three light fixture models adding both safety and subtle illumination to backyard hangouts. The post cap fits any TimberTech RadianceRail or Ornamental Rail post caps; the accent lights, which install on posts or between balusters, provide a downlight effect; and the riser lights add safety to steps and elevation changes. Riser and accent lights come in architectural bronze, and the accent lights are also available in white. The company also offers a 150- and 300-watt transformer. 800.307.7780. www.timbertech.com.

  • http://www.ecobuildingpulse.com/Images/Trex-Deck-Lighting_2_tcm131-807920.jpg

    true

    600

    Trex. Dimmable LED post cap, rail, riser, and recessed fixtures in the Trex Deck Lighting system are designed to install in new or existing decks using just a 1-inch Forstner bit. The system is compatible with all Trex post sleeves and many other brands of railing. The low-voltage LED lamps use 75% less energy than incandescent bulbs and can last up to 40,000 hours. 800.289.8739. www.trex.com.

  • http://www.ecobuildingpulse.com/Images/Deckorators_1_tcm131-807940.jpg

    true

    600

    Universal Forest Products. No need for wiring or electricity with Deckorators Designer Metal Solar Post Cap Lights, which capture and store the sun’s energy in solar cells. Made from copper-plated stainless steel, the designer series comes in two styles, Dynasty and Pentwater (shown). The maker also offers an LED recessed light kit that includes eight compact frosted lens lights, a transformer, a 16.4-foot extension wire, a photo sensor, a drill bit, and installation hardware. 800.332.5724. www.deckorators.com.

Five years ago, Baltimore deck builder Dave Lombardo would buy 10 packs of LED deck lights from The Home Depot, string them together, and then tiptoe off the deck lest one flicker out. But in the past few years, LED deck light technology has been transformed. Not only are they more energy efficient than halogens and incandescents, they come in hundreds of styles, don’t usually require an electrician for installation, and offer one surprising perk for homeowners: Bugs don’t flock to them.

“One or two different options for deck lighting have now become hundreds,” says deck builder Mick Feduniec of Deckscapes in South Carolina. “When we show clients, they’re just wowed by them. It’s without a doubt becoming more popular.”

Feduniec switched from incandescents to LEDs a year ago and since then, he says demand for lighted decks has quadrupled.

Until recently, LEDs posed challenges in terms of cost and light color, says Mike Onderko, senior product manager for Trex, which recently added deck lights to its line of composite decking and railing. “[They were] very bright white, almost like the old generation of compact fluorescents,” he says. Now, most LEDs create a yellow glow.

In addition to warmer tones, manufacturers of LED deck products are making installation a snap. For example, as compared with a traditional incandescent system, StairLighting System cuts installation time in half with its “plug-and-play” wiring, and Trex 1-inch-by-3/4-inch light fixtures install with a 1-inch Forstner bit, doing away with hole saws and jigsaws.

“Instead of having to cut, tape, all that stuff, you just find ‘A’ and then that plugs into ‘A’ on the other one,” says Feduniec. “Our [contractors] love it; it takes a lot less brain work to put together and has a much cleaner look.”

Another plus is that LEDs run on direct current, which does not require complex wiring schemes to avoid voltage drop, where lights get dimmer the further they are from the power source. So, you can string 50 lights on one DC transformer and still have a consistently bright deck, claims Scott Holland, president of StairLighting System.

Deck lights are low voltage, so transformers are necessary and can be expensive; however, one 60-watt transformer can support 240 LED riser and rail lights, 120 LED recessed lights, or 60 LED post caps versus a maximum of 30 incandescents, says Onderko.

And LEDs last longer—much longer. DeckLighting Systems uses 100,000-hour LED bulbs; even if they stay on 24/7, it would be about 12 years before they burn out, says Holland. More than 75% more energy efficient than incandescents, “you can light a deck for pennies a month compared to dollars,” he adds.

Furthermore, LEDs don’t attract pesky insects. Because heat output is insignificant, LEDs do not mesmerize bugs the way incandescents do, according to Lombardo, owner of American Deck & Patio, who says it’s not light that attracts them, it’s heat.

LIGHTS OUT
However, while manufacturers claim to sell LED deck fixtures at a comparable price, Bothell, Wash.-based builder Jerry Bannister says lamp price is the downside. “It’s much more expensive to pick up that little $15 bulb than it is to pick up a $1 incandescent,” he notes.

Perception is another hurdle both manufacturers and builders are trying to overcome. When manufacturers introduced LEDs to the residential market five years ago, at first, Trex’s Onderko says, “they were always kind of cheesy looking and cheap,” but that’s less true now with warmer light colors and more lumens per watt.

Despite the obstacles, the future looks bright for LEDs. “I would make a prediction that if you went shopping for a light bulb in 10 years, you won’t find anything but an LED,” says Kentucky-based architect Joseph Rey-Barreau. “For deck lighting, rather than having single sources of light, you can have a linear source. The possibilities are infinite now that you have that whole new way of thinking about light.”

Evelyn Royer is Assistant Editor for Building Products magazine. This article originally appeared in Building Products.